The gearbox is an important machine part of the floor grinding machine. However, during the use of the machine, the gearbox may be damaged.
due to improper operation by the operator or This damage may be due to poor maintenance, which affects the whole use of a machine and the effect after ground construction. Therefore, Maxkpa lists a few items for you to pay attention to when using the floor grinding machine.
1. Change the gear oil after 1000 hours of use for all gearboxes, and change gear oil every year thereafter; Symptom: The internal organs of the gearbox need a running-in process, so iron fragments are generated;
2. All gearboxes should be handled with care when replacing grinding discs and handling;
3. All gearboxes should be handled with care after each work;
4. All the gearboxes are cleaned after each work is completed, with clean water; (It can extend the service life of the machine and the oil seal)
5. Frequently check whether the oil level of the gearbox is normal, if it is not enough, add it in time; (check with the available oil stick)
6. If the gearbox has abnormal noise, stop using it immediately and check the reason. If you continue to use it, other pinion parts will be damaged.
The gearbox is a very important part of the floor grinding machine, so it needs frequent maintenance. Once the gearbox has a problem, you must immediately find the cause and solve it. In this way, the service life of the floor grinding machine will be longer, and the ground construction effect will be better.
As a large-scale floor grinding machine manufacturer, Maxkpa develops and produces various floor grinding machines. After more than ten years of development, the product variety is becoming more and more abundant. It uses a variety of floor treatments and is a good helper for floor construction.
Publication Date: 18 February, 2021
Category:
Concrete Floor Grinder
